Troubleshooting Ativ Smart PC Pro USB Detection Issue When Booting to Device
If you’re encountering issues with your Ativ Smart PC Pro not detecting USB devices when trying to boot from them, one potential solution is to disable the Fast BIOS setting in the BIOS Advanced Menu. This guide will walk you through the steps to resolve this issue.
Background
The Fast BIOS setting, also known as Fast Boot or Quick Boot, is designed to reduce the time it takes for your computer to boot into the operating system by skipping certain hardware checks and initialization processes. While this can speed up the boot process, it may also cause compatibility issues with certain USB devices when trying to boot from them.
Steps to Disable Fast BIOS
-
Access BIOS/UEFI Settings:
- Turn off your Ativ Smart PC Pro.
- Turn it back on and immediately start pressing the appropriate key to access the BIOS or UEFI settings. The specific key may vary depending on your computer’s manufacturer but is often one of the following: F2, F12, ESC, DEL, or F10. You may need to consult your computer’s manual or look for on-screen prompts during startup to determine the correct key.
-
Navigate to the Advanced Menu:
- Once you are in the BIOS or UEFI settings, use your keyboard’s arrow keys to navigate. Look for an “Advanced” or “Boot” menu. The exact location and naming may differ between BIOS versions.
-
Locate the Fast BIOS (Fast Boot) Setting:
- Within the Advanced or Boot menu, search for an option related to Fast BIOS, Fast Boot, or Quick Boot. It may be labeled differently depending on your computer’s BIOS version.
-
Disable Fast BIOS:
- Select the Fast BIOS setting and change it from “Enabled” to “Disabled” using the appropriate keyboard keys. Usually, you’ll need to press the “+” or “-” keys to toggle between options.
-
Save and Exit:
- After disabling Fast BIOS, locate the option to save your changes and exit the BIOS/UEFI settings. This is often labeled as “Save and Exit” or “Exit and Save Changes.”
-
Reboot Your Computer:
- Let your computer restart and try booting from the USB device again. It should now detect the USB device and allow you to proceed with your desired boot operation.
Conclusion
Disabling the Fast BIOS setting in your Ativ Smart PC Pro’s BIOS/UEFI settings should resolve the issue of USB devices not being detected when attempting to boot from them. By doing so, you ensure that the necessary hardware checks are performed during boot, allowing your computer to recognize and boot from the USB device successfully. If you continue to encounter problems or if this solution does not work, consider checking for BIOS updates or consulting the manufacturer’s support resources for further assistance.